Skip to product information
  • WyreStorm HDMI 3D over 2 CAT5 with IR 50m at 1080p.
1 of 1


WyreStorm HDMI 3D over 2 CAT5 with IR 50m at 1080p

Regular price $199.99 USD
Regular price $0.00 USD Sale price $199.99 USD
Sale Sold out
Shipping calculated at checkout.
The WyreStorm EX-2UTP-IR-50 balun set extends your HDMI version 1.3b 1080p video and Dolby TrueHD/DTS Master Audio (or lower audio formats), with IR relay for control and EDID setting up to 50m away from your HDTV HDMI source using Two runs of Cat6 UTP cable. It also transmits in 24bit color depth and 3D video (but does not have back channel IR). The WyreStorm EX-2UTP-IR-50 sender unit sits next to your computer, Blu-ray player or SkyHD box. Use an HDMI cable to connect your HDMI video source to the sender. The WyreStorm EX-2UTP-IR-50 receiver (RX-50IR-PRO) sits next to your HDMI display - up to 50m away for 1080p (60m for 1080i as used by SkyHD). The display plugs into the back of the WyreStorm EX-2UTP-IR-50 receiver. Two runs of Cat6 cable are required to connect the sender and the receiver units to each other.
  • Extends HDMI1.3b at 1080p60 up to 50m, 1080i60 up to 60m and works with 3DTV over shorter distances
  • An IR emitter in the transmitter and the included IR receiver which connects to the receiver allow IR remote control of source devices from remote viewing location
  • Supports resolutions up to 1080p and 3DTV (2 x 1080p)
  • Supports high bit-rate audio formats (Dolby TrueHD / DTS Master Audio)
  • Auto-adjustment of feedback, equalization and amplification, you do not need to make manual adjustments for the length of the cable, although this is possible using the DIP switches
  • Fully HDMI and HDCP compliant (when both power supplies are used)
  • ESD protection inside
  • DIP switches allow forced EDID selection on the EX0101-U65
  • Installs in minutes
  • Signalling rate: 2.25 Gbps
  • Single Link Range: 1080P
  • Input Video Signal:0.5 - 1.0 volts p-p
  • Input DDC Signal: 5 volts p-p (TTL)
  • Input HDMI Connector
  • Output HDMI Connector: Molex 24 pin female
  • Link Connectors: RJ-45
  • Power Consumption: 20 Watts (max)